Hardware studies specific

From Wiki at Neela Nurseries
Revision as of 18:11, 4 May 2022 by Ted (talk | contribs) (Adding some notes to Zephyr and I2C run time configuation changes, pull up pull down pin settings changes dynamic.)
Jump to: navigation, search

Overview

This wiki article an effort to fully understand Zephyr RTOS facilities to fully configure, at start time and dynamically throughout run time I2C peripherals supported by Zephyr and given microcontroller Hardware Abstraction Layer (HAL) code.


^ 2022-05-02 Monday

Search for Zephyr's I2C peripheral configuration code . . .

ted@localhost:~/projects/zephyr-based/hardware-Stage1-firmware-aws-iot-stand-alone/build$ grep -nr i2c_configure ./*
./mcuboot/zephyr/include/generated/syscall_dispatch.c:668:uintptr_t z_mrsh_i2c_configure(uintptr_t arg1, uintptr_t arg2, uintptr_t arg3,
./mcuboot/zephyr/include/generated/syscall_dispatch.c:1412:	[K_SYSCALL_I2C_CONFIGURE] = z_mrsh_i2c_configure,
./mcuboot/zephyr/include/generated/syscalls/i2c.h:24:extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config);
./mcuboot/zephyr/include/generated/syscalls/i2c.h:25:static inline int i2c_configure(const struct device * dev, uint32_t dev_config)
./mcuboot/zephyr/include/generated/syscalls/i2c.h:33:	return z_impl_i2c_configure(dev, dev_config);
./mcuboot/zephyr/include/generated/syscalls/i2c_configure_mrsh.c:10:extern int z_vrfy_i2c_configure(const struct device * dev, uint32_t dev_config);
./mcuboot/zephyr/include/generated/syscalls/i2c_configure_mrsh.c:11:uintptr_t z_mrsh_i2c_configure(uintptr_t arg0, uintptr_t arg1, uintptr_t arg2,
./mcuboot/zephyr/include/generated/syscalls/i2c_configure_mrsh.c:19:	int ret = z_vrfy_i2c_configure(*(const struct device **)&arg0, *(uint32_t*)&arg1)
./mcuboot/zephyr/misc/generated/syscalls.json:1159:            "int i2c_configure",
./spm/zephyr/include/generated/syscall_dispatch.c:668:uintptr_t z_mrsh_i2c_configure(uintptr_t arg1, uintptr_t arg2, uintptr_t arg3,
./spm/zephyr/include/generated/syscall_dispatch.c:1412:	[K_SYSCALL_I2C_CONFIGURE] = z_mrsh_i2c_configure,
./spm/zephyr/include/generated/syscalls/i2c.h:24:extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config);
./spm/zephyr/include/generated/syscalls/i2c.h:25:static inline int i2c_configure(const struct device * dev, uint32_t dev_config)
./spm/zephyr/include/generated/syscalls/i2c.h:33:	return z_impl_i2c_configure(dev, dev_config);
./spm/zephyr/include/generated/syscalls/i2c_configure_mrsh.c:10:extern int z_vrfy_i2c_configure(const struct device * dev, uint32_t dev_config);
./spm/zephyr/include/generated/syscalls/i2c_configure_mrsh.c:11:uintptr_t z_mrsh_i2c_configure(uintptr_t arg0, uintptr_t arg1, uintptr_t arg2,
./spm/zephyr/include/generated/syscalls/i2c_configure_mrsh.c:19:	int ret = z_vrfy_i2c_configure(*(const struct device **)&arg0, *(uint32_t*)&arg1)
./spm/zephyr/misc/generated/syscalls.json:1159:            "int i2c_configure",
./zephyr/include/generated/syscall_dispatch.c:668:uintptr_t z_mrsh_i2c_configure(uintptr_t arg1, uintptr_t arg2, uintptr_t arg3,
./zephyr/include/generated/syscall_dispatch.c:1412:	[K_SYSCALL_I2C_CONFIGURE] = z_mrsh_i2c_configure,
./zephyr/include/generated/syscalls/i2c.h:24:extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config);
./zephyr/include/generated/syscalls/i2c.h:25:static inline int i2c_configure(const struct device * dev, uint32_t dev_config)
./zephyr/include/generated/syscalls/i2c.h:33:	return z_impl_i2c_configure(dev, dev_config);
./zephyr/include/generated/syscalls/i2c_configure_mrsh.c:10:extern int z_vrfy_i2c_configure(const struct device * dev, uint32_t dev_config);
./zephyr/include/generated/syscalls/i2c_configure_mrsh.c:11:uintptr_t z_mrsh_i2c_configure(uintptr_t arg0, uintptr_t arg1, uintptr_t arg2,
./zephyr/include/generated/syscalls/i2c_configure_mrsh.c:19:	int ret = z_vrfy_i2c_configure(*(const struct device **)&arg0, *(uint32_t*)&arg1)
./zephyr/misc/generated/syscalls.json:1159:            "int i2c_configure",
ted@vibratsiya:~/projects/zephyr-based/hardware-Stage1-firmware-aws-iot-stand-alone/build$


- STEP - To identify first reference to routine i2c_configure() in Zephyr based project build artifacts.

An excerpt from file `ncs/project_root/build/zephyr/include/generated/syscalls/i2c.h:

 24 extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config);
 25 static inline int i2c_configure(const struct device * dev, uint32_t dev_config)
 26 {
 27 #ifdef CONFIG_USERSPACE
 28         if (z_syscall_trap()) {
 29                 return (int) arch_syscall_invoke2(*(uintptr_t *)&dev, *(uintptr_t *)&dev_config, K_SYSCALL_I2C_CONFIGURE);
 30         }
 31 #endif
 32         compiler_barrier();
 33         return z_impl_i2c_configure(dev, dev_config);
 34 }


Search results:

ted@vibratsiya:~/projects/zephyr-based/hardware-Stage1-firmware-aws-iot-stand-alone/build$ grep -nr z_impl_i2c_configure ./*
./mcuboot/zephyr/include/generated/syscalls/i2c.h:24:extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config);
./mcuboot/zephyr/include/generated/syscalls/i2c.h:33:	return z_impl_i2c_configure(dev, dev_config);
./spm/zephyr/include/generated/syscalls/i2c.h:24:extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config);
./spm/zephyr/include/generated/syscalls/i2c.h:33:	return z_impl_i2c_configure(dev, dev_config);
./zephyr/include/generated/syscalls/i2c.h:24:extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config);
./zephyr/include/generated/syscalls/i2c.h:33:	return z_impl_i2c_configure(dev, dev_config);

Hmm kind of dead ending here, no routine definitions found in either `zephyr` source tree nor `nrf` code projects. And `west build -t menuconfig` session shows CONFIG_USERSPACE=n.


- STEP - A search for CONFIG_PULL_UP symbol among Zephyr sources:

Subset of many results . . .

./boards/arm/nrf9160dk_nrf9160/nrf9160dk_nrf9160_common.dts:47:			gpios = <&gpio0 8 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
./boards/arm/nrf9160dk_nrf9160/nrf9160dk_nrf9160_common.dts:51:			gpios = <&gpio0 9 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
./boards/arm/nrf9160dk_nrf9160/nrf9160dk_nrf9160_common.dts:55:			gpios = <&gpio0 6 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
./boards/arm/nrf9160dk_nrf9160/nrf9160dk_nrf9160_common.dts:59:			gpios = <&gpio0 7 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
./boards/arm/nrf9160dk_nrf9160/nrf9160dk_nrf9160_common_0_14_0.dtsi:38:		int-gpios = <&gpio0 6 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;


^ Search For I2C Configuration Source Code

  1 "nrf":"/home/ted/projects/zephyr-based/nrf":"/home/ted/projects/zephyr-based/nrf"
  2 "openthread":"/home/ted/projects/zephyr-based/modules/lib/openthread":"/home/ted/projects/zephyr-based/modules/lib/openthread/zephyr"
  3 "mcuboot":"/home/ted/projects/zephyr-based/bootloader/mcuboot":"${ZEPHYR_MCUBOOT_CMAKE_DIR}"
  4 "trusted-firmware-m":"/home/ted/projects/zephyr-based/modules/tee/tfm":"${ZEPHYR_TRUSTED_FIRMWARE_M_CMAKE_DIR}"
  5 "tfm-mcuboot":"/home/ted/projects/zephyr-based/modules/tee/tfm-mcuboot":""
  6 "cjson":"/home/ted/projects/zephyr-based/modules/lib/cjson":"${ZEPHYR_CJSON_CMAKE_DIR}"
  7 "pelion-dm":"/home/ted/projects/zephyr-based/modules/lib/pelion-dm":"/home/ted/projects/zephyr-based/modules/lib/pelion-dm/zephyr/cmake"
  8 "cddl-gen":"/home/ted/projects/zephyr-based/modules/lib/cddl-gen":"${ZEPHYR_CDDL_GEN_CMAKE_DIR}"
  9 "memfault-firmware-sdk":"/home/ted/projects/zephyr-based/modules/lib/memfault-firmware-sdk":"/home/ted/projects/zephyr-based/modules/lib/memfaul    t-firmware-sdk/ports/zephyr"
 10 "cmsis":"/home/ted/projects/zephyr-based/modules/hal/cmsis":"/home/ted/projects/zephyr-based/modules/hal/cmsis"
 11 "canopennode":"/home/ted/projects/zephyr-based/modules/lib/canopennode":"/home/ted/projects/zephyr-based/modules/lib/canopennode"
 12 "civetweb":"/home/ted/projects/zephyr-based/modules/lib/civetweb":"/home/ted/projects/zephyr-based/modules/lib/civetweb"
 13 "fatfs":"/home/ted/projects/zephyr-based/modules/fs/fatfs":"/home/ted/projects/zephyr-based/modules/fs/fatfs"
 14 "hal_nordic":"/home/ted/projects/zephyr-based/modules/hal/nordic":"${ZEPHYR_HAL_NORDIC_CMAKE_DIR}"
 15 "st":"/home/ted/projects/zephyr-based/modules/hal/st":"/home/ted/projects/zephyr-based/modules/hal/st"
 16 "libmetal":"/home/ted/projects/zephyr-based/modules/hal/libmetal":"/home/ted/projects/zephyr-based/modules/hal/libmetal"
 17 "lvgl":"/home/ted/projects/zephyr-based/modules/lib/gui/lvgl":"/home/ted/projects/zephyr-based/modules/lib/gui/lvgl"
 18 "mbedtls":"/home/ted/projects/zephyr-based/modules/crypto/mbedtls":"${ZEPHYR_MBEDTLS_CMAKE_DIR}"
 19 "mcumgr":"/home/ted/projects/zephyr-based/modules/lib/mcumgr":"/home/ted/projects/zephyr-based/modules/lib/mcumgr"
 20 "open-amp":"/home/ted/projects/zephyr-based/modules/lib/open-amp":"/home/ted/projects/zephyr-based/modules/lib/open-amp"
 21 "loramac-node":"/home/ted/projects/zephyr-based/modules/lib/loramac-node":"/home/ted/projects/zephyr-based/modules/lib/loramac-node/zephyr"
 22 "segger":"/home/ted/projects/zephyr-based/modules/debug/segger":"${ZEPHYR_SEGGER_CMAKE_DIR}"
 23 "tinycbor":"/home/ted/projects/zephyr-based/modules/lib/tinycbor":"/home/ted/projects/zephyr-based/modules/lib/tinycbor/zephyr"
 24 "tinycrypt":"/home/ted/projects/zephyr-based/modules/crypto/tinycrypt":"/home/ted/projects/zephyr-based/modules/crypto/tinycrypt"
 25 "littlefs":"/home/ted/projects/zephyr-based/modules/fs/littlefs":"/home/ted/projects/zephyr-based/modules/fs/littlefs"
 26 "mipi-sys-t":"/home/ted/projects/zephyr-based/modules/debug/mipi-sys-t":"/home/ted/projects/zephyr-based/modules/debug/mipi-sys-t"
 27 "nrf_hw_models":"/home/ted/projects/zephyr-based/modules/bsim_hw_models/nrf_hw_models":"/home/ted/projects/zephyr-based/modules/bsim_hw_models/n    rf_hw_models"
 28 "TraceRecorder":"/home/ted/projects/zephyr-based/modules/debug/TraceRecorder":"${ZEPHYR_TRACERECORDER_CMAKE_DIR}"
 29 "nrfxlib":"/home/ted/projects/zephyr-based/nrfxlib":"${ZEPHYR_NRFXLIB_CMAKE_DIR}"
 30 "connectedhomeip":"/home/ted/projects/zephyr-based/modules/lib/matter":"/home/ted/projects/zephyr-based/modules/lib/matter/config/nrfconnect/chi    p-module"
~                                                                                                                                                   
~                                                                                                                                                   
~                                                                                                                                                   
~                                                                                                                                                   
~                                                                                                                                                   
~                                                                                                                                                   
~                                                                                                                                                   
"zephyr_modules.txt" 30L, 3486C

Out of these Zephyr modules built as part of our project the hal related ones appear to be:

  • cmsis
  • hal_nordic
  • st
  • libmetal

And possibly `nrfxlib`.



./zephyr/drivers/i2c/i2c_handlers.c


3

- STEP 1 -

$ grep -nr z_vrfy_i2c_configure ./*

./zephyr/drivers/i2c/i2c_handlers.c:11:static inline int z_vrfy_i2c_configure(const struct device *dev,

 7 #include <drivers/i2c.h>
 8 #include <string.h>
 9 #include <syscall_handler.h>
10 
11 static inline int z_vrfy_i2c_configure(const struct device *dev,
12                                        uint32_t dev_config)
13 {
14         Z_OOPS(Z_SYSCALL_DRIVER_I2C(dev, configure));
15         return z_impl_i2c_configure((const struct device *)dev, dev_config);
16 }
17 #in


- STEP 2 -

./zephyr/include/drivers/i2c.h:310:static inline int z_impl_i2c_configure(const struct device *dev,

298 /**
299  * @brief Configure operation of a host controller.
300  *
301  * @param dev Pointer to the device structure for the driver instance.
302  * @param dev_config Bit-packed 32-bit value to the device runtime configuration
303  * for the I2C controller.
304  *
305  * @retval 0 If successful.
306  * @retval -EIO General input / output error, failed to configure device.
307  */
308 __syscall int i2c_configure(const struct device *dev, uint32_t dev_config);
309 
310 static inline int z_impl_i2c_configure(const struct device *dev,
311                                        uint32_t dev_config)
312 {
313         const struct i2c_driver_api *api =
314                 (const struct i2c_driver_api *)dev->api;
315 
316         return api->configure(dev, dev_config);
317 }

- STEP 3 -

./zephyr/include/drivers/i2c.h:137:__subsystem struct i2c_driver_api {

137 __subsystem struct i2c_driver_api {
138         i2c_api_configure_t configure;
139         i2c_api_full_io_t transfer;
140         i2c_api_slave_register_t slave_register;
141         i2c_api_slave_unregister_t slave_unregister;
142         i2c_api_recover_bus_t recover_bus;
143 };


. . . This code looks familiar and very similar to constructs we needed to implement for Kionix out-of-tree Zephyr driver, work cerca 2021 Q3.


Zephyr source i2c_nrfx_twim dot c

First reply to Devzone post nnnnn points us to study some Zephyr sources in `~/projects/zephyr-based/zephyr/drivers/i2c`.


- - - top of page - - -