Spi device tree source code
From Wiki at Neela Nurseries
2022-08-11 Thursday
Notes on SPI device tree source, with goal to add SPI device to modified RPi Pico DTS files, which build firmware to run on Sparkfun DEV-18288 board.
In Zephyr RTOS' supported board dts files we find SPI peripherals defined for several boards. Here are excerpts
zephyr/boards/arm/sparkfun_thing_plus_nrf9160/sparkfun_thing_plus_nrf9160_common.dts
142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 |
&spi3 {
compatible = "nordic,nrf-spim";
status = "okay";
cs-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&spi3_default>;
pinctrl-1 = <&spi3_sleep>;
pinctrl-names = "default", "sleep";
w25q32jv: w25q32jv@0 {
compatible = "jedec,spi-nor";
label = "W25Q32JV";
reg = <0>;
spi-max-frequency = <40000000>;
wp-gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
hold-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
size = <0x2000000>;
has-dpd;
t-enter-dpd = <3000>;
t-exit-dpd = <30000>;
jedec-id = [ ef 40 16 ];
};
};
|
a |
b |
^ YAML device bindings files
To support a typical development kit or custom board with multiple peripherals we need a device bindings file comparable to this ... bindings file:
- ~/projects-sandbox/workspace-for-rpi/zephyr/boards/arm/nrf9160dk_nrf9160/nrf9160dk_nrf9160.yaml
identifier: nrf9160dk_nrf9160 name: nRF9160-DK-NRF9160 type: mcu arch: arm toolchain: - gnuarmemb - xtools - zephyr ram: 88 flash: 256 supported: - arduino_gpio - arduino_i2c - gpio - i2c - pwm - spi - watchdog - counter
