Hardware studies specific
From Wiki at Neela Nurseries
2022-05-02 Monday
Search for Zephyr's I2C peripheral configuration code . . .
ted@localhost:~/projects/zephyr-based/hardware-Stage1-firmware-aws-iot-stand-alone/build$ grep -nr i2c_configure ./* ./mcuboot/zephyr/include/generated/syscall_dispatch.c:668:uintptr_t z_mrsh_i2c_configure(uintptr_t arg1, uintptr_t arg2, uintptr_t arg3, ./mcuboot/zephyr/include/generated/syscall_dispatch.c:1412: [K_SYSCALL_I2C_CONFIGURE] = z_mrsh_i2c_configure, ./mcuboot/zephyr/include/generated/syscalls/i2c.h:24:extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config); ./mcuboot/zephyr/include/generated/syscalls/i2c.h:25:static inline int i2c_configure(const struct device * dev, uint32_t dev_config) ./mcuboot/zephyr/include/generated/syscalls/i2c.h:33: return z_impl_i2c_configure(dev, dev_config); ./mcuboot/zephyr/include/generated/syscalls/i2c_configure_mrsh.c:10:extern int z_vrfy_i2c_configure(const struct device * dev, uint32_t dev_config); ./mcuboot/zephyr/include/generated/syscalls/i2c_configure_mrsh.c:11:uintptr_t z_mrsh_i2c_configure(uintptr_t arg0, uintptr_t arg1, uintptr_t arg2, ./mcuboot/zephyr/include/generated/syscalls/i2c_configure_mrsh.c:19: int ret = z_vrfy_i2c_configure(*(const struct device **)&arg0, *(uint32_t*)&arg1) ./mcuboot/zephyr/misc/generated/syscalls.json:1159: "int i2c_configure", ./spm/zephyr/include/generated/syscall_dispatch.c:668:uintptr_t z_mrsh_i2c_configure(uintptr_t arg1, uintptr_t arg2, uintptr_t arg3, ./spm/zephyr/include/generated/syscall_dispatch.c:1412: [K_SYSCALL_I2C_CONFIGURE] = z_mrsh_i2c_configure, ./spm/zephyr/include/generated/syscalls/i2c.h:24:extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config); ./spm/zephyr/include/generated/syscalls/i2c.h:25:static inline int i2c_configure(const struct device * dev, uint32_t dev_config) ./spm/zephyr/include/generated/syscalls/i2c.h:33: return z_impl_i2c_configure(dev, dev_config); ./spm/zephyr/include/generated/syscalls/i2c_configure_mrsh.c:10:extern int z_vrfy_i2c_configure(const struct device * dev, uint32_t dev_config); ./spm/zephyr/include/generated/syscalls/i2c_configure_mrsh.c:11:uintptr_t z_mrsh_i2c_configure(uintptr_t arg0, uintptr_t arg1, uintptr_t arg2, ./spm/zephyr/include/generated/syscalls/i2c_configure_mrsh.c:19: int ret = z_vrfy_i2c_configure(*(const struct device **)&arg0, *(uint32_t*)&arg1) ./spm/zephyr/misc/generated/syscalls.json:1159: "int i2c_configure", ./zephyr/include/generated/syscall_dispatch.c:668:uintptr_t z_mrsh_i2c_configure(uintptr_t arg1, uintptr_t arg2, uintptr_t arg3, ./zephyr/include/generated/syscall_dispatch.c:1412: [K_SYSCALL_I2C_CONFIGURE] = z_mrsh_i2c_configure, ./zephyr/include/generated/syscalls/i2c.h:24:extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config); ./zephyr/include/generated/syscalls/i2c.h:25:static inline int i2c_configure(const struct device * dev, uint32_t dev_config) ./zephyr/include/generated/syscalls/i2c.h:33: return z_impl_i2c_configure(dev, dev_config); ./zephyr/include/generated/syscalls/i2c_configure_mrsh.c:10:extern int z_vrfy_i2c_configure(const struct device * dev, uint32_t dev_config); ./zephyr/include/generated/syscalls/i2c_configure_mrsh.c:11:uintptr_t z_mrsh_i2c_configure(uintptr_t arg0, uintptr_t arg1, uintptr_t arg2, ./zephyr/include/generated/syscalls/i2c_configure_mrsh.c:19: int ret = z_vrfy_i2c_configure(*(const struct device **)&arg0, *(uint32_t*)&arg1) ./zephyr/misc/generated/syscalls.json:1159: "int i2c_configure", ted@vibratsiya:~/projects/zephyr-based/hardware-Stage1-firmware-aws-iot-stand-alone/build$
- STEP - To identify first reference to routine i2c_configure() in Zephyr based project build artifacts.
An excerpt from file `ncs/project_root/build/zephyr/include/generated/syscalls/i2c.h:
24 extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config);
25 static inline int i2c_configure(const struct device * dev, uint32_t dev_config)
26 {
27 #ifdef CONFIG_USERSPACE
28 if (z_syscall_trap()) {
29 return (int) arch_syscall_invoke2(*(uintptr_t *)&dev, *(uintptr_t *)&dev_config, K_SYSCALL_I2C_CONFIGURE);
30 }
31 #endif
32 compiler_barrier();
33 return z_impl_i2c_configure(dev, dev_config);
34 }
Search results:
ted@vibratsiya:~/projects/zephyr-based/hardware-Stage1-firmware-aws-iot-stand-alone/build$ grep -nr z_impl_i2c_configure ./* ./mcuboot/zephyr/include/generated/syscalls/i2c.h:24:extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config); ./mcuboot/zephyr/include/generated/syscalls/i2c.h:33: return z_impl_i2c_configure(dev, dev_config); ./spm/zephyr/include/generated/syscalls/i2c.h:24:extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config); ./spm/zephyr/include/generated/syscalls/i2c.h:33: return z_impl_i2c_configure(dev, dev_config); ./zephyr/include/generated/syscalls/i2c.h:24:extern int z_impl_i2c_configure(const struct device * dev, uint32_t dev_config); ./zephyr/include/generated/syscalls/i2c.h:33: return z_impl_i2c_configure(dev, dev_config);
Hmm kind of dead ending here, no routine definitions found in either `zephyr` source tree nor `nrf` code projects. And `west build -t menuconfig` session shows CONFIG_USERSPACE=n.
- STEP - A search for CONFIG_PULL_UP symbol among Zephyr sources:
Subset of many results . . .
./boards/arm/nrf9160dk_nrf9160/nrf9160dk_nrf9160_common.dts:47: gpios = <&gpio0 8 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; ./boards/arm/nrf9160dk_nrf9160/nrf9160dk_nrf9160_common.dts:51: gpios = <&gpio0 9 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; ./boards/arm/nrf9160dk_nrf9160/nrf9160dk_nrf9160_common.dts:55: gpios = <&gpio0 6 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; ./boards/arm/nrf9160dk_nrf9160/nrf9160dk_nrf9160_common.dts:59: gpios = <&gpio0 7 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; ./boards/arm/nrf9160dk_nrf9160/nrf9160dk_nrf9160_common_0_14_0.dtsi:38: int-gpios = <&gpio0 6 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
^ Search For I2C Configuration Source Code
1 "nrf":"/home/ted/projects/zephyr-based/nrf":"/home/ted/projects/zephyr-based/nrf"
2 "openthread":"/home/ted/projects/zephyr-based/modules/lib/openthread":"/home/ted/projects/zephyr-based/modules/lib/openthread/zephyr"
3 "mcuboot":"/home/ted/projects/zephyr-based/bootloader/mcuboot":"${ZEPHYR_MCUBOOT_CMAKE_DIR}"
4 "trusted-firmware-m":"/home/ted/projects/zephyr-based/modules/tee/tfm":"${ZEPHYR_TRUSTED_FIRMWARE_M_CMAKE_DIR}"
5 "tfm-mcuboot":"/home/ted/projects/zephyr-based/modules/tee/tfm-mcuboot":""
6 "cjson":"/home/ted/projects/zephyr-based/modules/lib/cjson":"${ZEPHYR_CJSON_CMAKE_DIR}"
7 "pelion-dm":"/home/ted/projects/zephyr-based/modules/lib/pelion-dm":"/home/ted/projects/zephyr-based/modules/lib/pelion-dm/zephyr/cmake"
8 "cddl-gen":"/home/ted/projects/zephyr-based/modules/lib/cddl-gen":"${ZEPHYR_CDDL_GEN_CMAKE_DIR}"
9 "memfault-firmware-sdk":"/home/ted/projects/zephyr-based/modules/lib/memfault-firmware-sdk":"/home/ted/projects/zephyr-based/modules/lib/memfaul t-firmware-sdk/ports/zephyr"
10 "cmsis":"/home/ted/projects/zephyr-based/modules/hal/cmsis":"/home/ted/projects/zephyr-based/modules/hal/cmsis"
11 "canopennode":"/home/ted/projects/zephyr-based/modules/lib/canopennode":"/home/ted/projects/zephyr-based/modules/lib/canopennode"
12 "civetweb":"/home/ted/projects/zephyr-based/modules/lib/civetweb":"/home/ted/projects/zephyr-based/modules/lib/civetweb"
13 "fatfs":"/home/ted/projects/zephyr-based/modules/fs/fatfs":"/home/ted/projects/zephyr-based/modules/fs/fatfs"
14 "hal_nordic":"/home/ted/projects/zephyr-based/modules/hal/nordic":"${ZEPHYR_HAL_NORDIC_CMAKE_DIR}"
15 "st":"/home/ted/projects/zephyr-based/modules/hal/st":"/home/ted/projects/zephyr-based/modules/hal/st"
16 "libmetal":"/home/ted/projects/zephyr-based/modules/hal/libmetal":"/home/ted/projects/zephyr-based/modules/hal/libmetal"
17 "lvgl":"/home/ted/projects/zephyr-based/modules/lib/gui/lvgl":"/home/ted/projects/zephyr-based/modules/lib/gui/lvgl"
18 "mbedtls":"/home/ted/projects/zephyr-based/modules/crypto/mbedtls":"${ZEPHYR_MBEDTLS_CMAKE_DIR}"
19 "mcumgr":"/home/ted/projects/zephyr-based/modules/lib/mcumgr":"/home/ted/projects/zephyr-based/modules/lib/mcumgr"
20 "open-amp":"/home/ted/projects/zephyr-based/modules/lib/open-amp":"/home/ted/projects/zephyr-based/modules/lib/open-amp"
21 "loramac-node":"/home/ted/projects/zephyr-based/modules/lib/loramac-node":"/home/ted/projects/zephyr-based/modules/lib/loramac-node/zephyr"
22 "segger":"/home/ted/projects/zephyr-based/modules/debug/segger":"${ZEPHYR_SEGGER_CMAKE_DIR}"
23 "tinycbor":"/home/ted/projects/zephyr-based/modules/lib/tinycbor":"/home/ted/projects/zephyr-based/modules/lib/tinycbor/zephyr"
24 "tinycrypt":"/home/ted/projects/zephyr-based/modules/crypto/tinycrypt":"/home/ted/projects/zephyr-based/modules/crypto/tinycrypt"
25 "littlefs":"/home/ted/projects/zephyr-based/modules/fs/littlefs":"/home/ted/projects/zephyr-based/modules/fs/littlefs"
26 "mipi-sys-t":"/home/ted/projects/zephyr-based/modules/debug/mipi-sys-t":"/home/ted/projects/zephyr-based/modules/debug/mipi-sys-t"
27 "nrf_hw_models":"/home/ted/projects/zephyr-based/modules/bsim_hw_models/nrf_hw_models":"/home/ted/projects/zephyr-based/modules/bsim_hw_models/n rf_hw_models"
28 "TraceRecorder":"/home/ted/projects/zephyr-based/modules/debug/TraceRecorder":"${ZEPHYR_TRACERECORDER_CMAKE_DIR}"
29 "nrfxlib":"/home/ted/projects/zephyr-based/nrfxlib":"${ZEPHYR_NRFXLIB_CMAKE_DIR}"
30 "connectedhomeip":"/home/ted/projects/zephyr-based/modules/lib/matter":"/home/ted/projects/zephyr-based/modules/lib/matter/config/nrfconnect/chi p-module"
~
~
~
~
~
~
~
"zephyr_modules.txt" 30L, 3486C
