Containers and virtual machines

From Wiki at Neela Nurseries
Revision as of 19:03, 16 June 2021 by Ted (talk | contribs) (On first use of Docker: minor name change for privacy.)
Jump to: navigation, search

Unix and Linux config :: Containers :: Clusters :: <link>


^ Container Software

A promising starting point, collection of six articles / tutorials on Docker containers:

 *  https://medium.com/sysf/docker/home

A general note following about three days' Docker container experimentation, and to question "should I be using a Docker container interactively, running multiple apps, some simultaneously?". (Note the following forum post chain is a quagmire of issues and opions!):

 *  https://news.ycombinator.com/item?id=7950326

^ Docker starting point

Notes on Docker containerizing software. Note, to get a practical start it is a good and or needed step to create a user account with Docker dot com. Single user and free accounts with some advanced Docker features disabled are available. A good starting tutorial for beginners is written by one Brian Hogan of Digital Ocean, this article published 2018 July 5. First reference in list here:

Ted noting too there may be a daily limit to the number of docker images which a user with a free account can push to Docker's image repository. Docker's image repository provides URLs of the form https://hub.docker.com/u/<user_name>, where username is the given person's Docker account user name.


^ specific commands

Start a docker image with access to a particular host directory:

^ docker commit ...



^ docker push <image_identifier_string_and_optional_tag>

Series of docker push invocations for a work-in-progress image. Note the tag names are optional until one needs push an image that's being amended, such that it is a newer or different version of an existing image on the remote Docker repository:

  886  docker push tedhavelkaad0602/ubuntu-git-plus-arm-none-eabi-gcc
  932  docker push tedhavelkaad0602/ubuntu-git-plus-arm-none-eabi-gcc:version-0p2
  944  docker push tedhavelkaad0602/ubuntu-git-plus-arm-none-eabi-gcc:version-0p3
  962  docker push tedhavelkaad0602/ubuntu-git-plus-arm-none-eabi-gcc:version-0p4
  965  docker push tedhavelkaad0602/ubuntu-git-plus-arm-none-eabi-gcc:version-0p5


Delete a Docker repository on Docker hub:

^ docker container rm [...], docker image rm [...]

Delete (remove) a local Docker image . . . first must remove all local containers which use given image:

Commands which worked locally:

 1036  docker ps -a
 1037  docker container rm bdc45e3021ad
 1038  docker ps -a
 1039  docker container rm 3899ce3b4c5f 85206c6c2565
 1040  docker ps -a
 1041  docker container rm e530246d9393 775ef655da0f 51a5967aecf8
 1042  docker ps -a
   .
   .
   .
 1047  docker image rm tedhavelkaad0602/ubuntu-04-vim--openssh-server--man-db
 1048  docker images
 1049  docker image rm tedhavelkaad0602/ubuntu-nodejs-net-tools
 1050  docker images


Secure shell into, or otherwise connect with a running Docker container in and of a Linux environment:

A couple examples of running second bash instance of a given Docker container, not a login, but provides second interactive window or interface to a given Docker container:

^ docker exec [options] [command_in_container]

  937  docker exec -t -i a42e2e801d60 bash
  938  docker exec -i -t 51a5967aecf8 bash

Note this can have unintended consequences given that there's no ssh server running to handle multiple, or additional logins!

-- Enable USB access in Docker container --


^ Docker volumes

https://www.digitalocean.com/community/tutorials/how-to-share-data-between-docker-containers


^ Anatomy of a Dockerfile

Ok Ted needs to figure out what are Dockerfiles and how should they be authored and maintained. One example that's annotated:

A link to a Docker based project which comes very close to what we're working on for an embedded development toolchain and environment that's fully tracked, easy to reproduce on demand:


^ Promising Docker images

^ to access physical devices within container


^ Kubernetes Container Software

Kubernetes notes 2021-06-09 This section a stub section.


^ Oracle Corporation VirtualBox software

VirtualBox on-line manual

    Some important VM terms include,
      • host OS . . . the OS on which VirtualBox software runs
      • guest OS . . . the OS which runs inside a VirtualBox VM instance
      • virtual machine . . . the hosting environment which VirtualBox creates for given guest OS


    NOTE! An important BIOS feature and setting to permit virtual machines to run at all using VirtualBox >= 6.1.0 is detailed here at forums dot virtualbox dot org, topic equals 62339:


    First set up steps for virtual machine:


    To set up shared folders in VirtualBox instances, see VirtualBox documentation chapter 4 at the first following URL. There are also some needed steps detailed in same Oracle documentation, chapter 2, second URL here:

    Following screen capture is from Ted's work setting up virtual Ubuntu host.

    Figure 1 - capture of VM Ubuntu guest OS command prompt, with steps to mount VirtualBox CDROM drive:

    Executing-VBoxLinuxAdditions-dot-run.PNG

    Interestingly, mounting the device /dev/sr0 within the guest OS provides access to several files which we did not see or explicitly install when installing VirtualBox framework software. Scripts to set up needed Linux kernel modules are among these files at /media/cdrom.

    To configure port forwarding, for ssh from host OS to guest OS:

    Where VirtualBox stores its files . . .


    ^ References and Notes

    For Ubuntu installs be sure to make /boot large enough, e.g. ~500MB when creating a separate /boot partition:

    On first use of Docker

    Just after installing docker-ce, `sudo systemctl status docker` returns:
    
    ● docker.service - Docker Application Container Engine
         Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)
         Active: active (running) since Wed 2021-06-16 18:57:15 UTC; 54s ago
    TriggeredBy: ● docker.socket
           Docs: https://docs.docker.com
       Main PID: 20113 (dockerd)
          Tasks: 8
         Memory: 40.2M
         CGroup: /system.slice/docker.service
                 └─20113 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock
    
    Jun 16 18:57:15 ubuntu-vm dockerd[20113]: time="2021-06-16T18:57:15.411564912Z" level=warning msg="Your kernel does not support CPU realtime scheduler"
    Jun 16 18:57:15 ubuntu-vm dockerd[20113]: time="2021-06-16T18:57:15.411704850Z" level=warning msg="Your kernel does not support cgroup blkio weight"
    Jun 16 18:57:15 ubuntu-vm dockerd[20113]: time="2021-06-16T18:57:15.411837721Z" level=warning msg="Your kernel does not support cgroup blkio weight_device"
    Jun 16 18:57:15 ubuntu-vm dockerd[20113]: time="2021-06-16T18:57:15.412338475Z" level=info msg="Loading containers: start."
    Jun 16 18:57:15 ubuntu-vm dockerd[20113]: time="2021-06-16T18:57:15.573219785Z" level=info msg="Default bridge (docker0) is assigned with an IP address 172.17.0.0/16. Daemon option --bip>
    Jun 16 18:57:15 ubuntu-vm dockerd[20113]: time="2021-06-16T18:57:15.675938542Z" level=info msg="Loading containers: done."
    Jun 16 18:57:15 ubuntu-vm dockerd[20113]: time="2021-06-16T18:57:15.714086036Z" level=info msg="Docker daemon" commit=b0f5bc3 graphdriver(s)=overlay2 version=20.10.7
    Jun 16 18:57:15 ubuntu-vm dockerd[20113]: time="2021-06-16T18:57:15.715744202Z" level=info msg="Daemon has completed initialization"
    Jun 16 18:57:15 ubuntu-vm systemd[1]: Started Docker Application Container Engine.
    Jun 16 18:57:15 ubuntu-vm dockerd[20113]: time="2021-06-16T18:57:15.837838160Z" level=info msg="API listen on /run/docker.sock"
    
    
    Ted noting this due to the three warnings regarding "kernel does not support x...".
    

    Git client config in VM and Docker container

    For firmware dev work whether in virtual machines and or Docker containers, we need access to remote git repositories. SSL keys are necessary for this access. Here are some beginning notes to explain setting up such keys within each environment:

      337  ssh-keygen -t ed25519   <-- generate elliptic type key
      338  cd .ssh
      340  ls -l
      341  cat id_ed25519.pub      <-- dump public key to terminal to copy
      342  which ssh-agent         <-- check that `ssh-agent` is installed and in local $PATH variable
      346  ps ax | grep ssh-agent  <-- check whether ssh-agent is presently running
      348  eval `ssh-agent -s`     <-- start ssh-agent running when not found running
      349  ps ax | grep ssh-agent  <-- confirm running in background as a daemon
      350  ssh-add ./id_ed25519    <-- add the private key of the public + private key pair created above
    

    GNU Arm Toolchain refs:

        gcc-arm-none-eabi-10-2020-q4-major-x86_64-linux.tar.bz2
        Linux x86_64 Tarball
        MD5: 8312c4c91799885f222f663fc81f9a31 
    
        gcc-arm-none-eabi-10-2020-q4-major-src.tar.bz2
        Source Tarball
        MD5: 0cc79529934703e16ec25a8915028897