Difference between revisions of "Git notes"

From Wiki at Neela Nurseries
Jump to: navigation, search
m (→‎^ Git Command Examples: add `git diff-tree` example)
m (→‎^ Git Command Examples: - add two git diff examples)
Line 111: Line 111:
  
 
   $ for hash in COMMIT_HASH_1 COMMIT_HASH_2 COMMIT_HASH_3; do git diff-tree -r $hash; done
 
   $ for hash in COMMIT_HASH_1 COMMIT_HASH_2 COMMIT_HASH_3; do git diff-tree -r $hash; done
 +
 +
To find out which files have changed in the branch work on watermark timeouts, call git this way:
 +
 +
  $ git diff --name-only COMMIT_HASH_1 COMMIT_HASH_2
 +
 +
To see the changes in one file between two commits, call git with the 'diff' command and these four arguments:
 +
 +
  $ git diff COMMIT_HASH_1 COMMIT_HASH_2 -- RELATIVE_PATH_AND_FILENAME
 +
 +
<i>Note:  the double dash '--' separates commit hash args from filenames, as commit hashes may number more than two.</i>
 +
 +
 +
  
 
<!-- comment -->
 
<!-- comment -->

Revision as of 20:45, 19 September 2023

-- 2017-12-04 Monday - somvaar - सोमवार--
Git Notes


^ OVERVIEW - अवलोकन

Following article / document collection of notes on version control software named git. Worth noting at top of these notes is an nvie.com blog post about practical and widespread git branching strategy, at https://nvie.com/posts/a-successful-git-branching-model/.


^ Common Commands


Wanting to understand and use git better, here are some on-line references to git version control. Noting here git reference at orga.cat, this reference well-written with lots of commands and concise explanations of each command. This reference is first in list:

Basic git commands:

2020-05-06

Atlassian article on Git's edit/stage/commit pattern of use (Invoke `git add` to stage local file changes.):

Setting up ssh key pairs for secure authentication:

Why are my local changes getting lost? Git commit-and-push-sequence not sufficient to transfer file changes to given git repository . . .

Git references found while answering specific git task questions: 

  $ git diff HEAD .

2022-01-10 Commands in `git` to rename local and remote branch:

ejemplo - board `anda-m`: 

  1  2003  git checkout andam-board-bring-up
  2  2004  git branch -m anda-m-board-bring-up
  3  2005  git branch
  4  2006  git push origin -u anda-m-board-bring-up
  5  2007  git push origin --delete andam-board-bring-up
  6  2008  history

Markdown and .md file formatting at Github

Git and Working with Remote Repositories

Release tag creation and naming in Git


^ Git Command Examples

On the local work station, to see from which remote git repository a working copy comes: 

 $ git remote -v

A git invocation to perform pattern matching like `grep`: 

 $ git -C ../modules/hal/nxp/mcux/mcux-sdk grep -nC3 'FLASH_Init'

Within a git repository a developer may identify the full path to the repo or project root by issuing command: 

 $ git rev-parse --show-toplevel

A short form summary of commit messages with just the first line of each shown: 

 $ git log --oneline

An `ncurses` like character graphic tree representation of a repository's commit history: 

 $ git log --oneline --graph --all

Capture given git log to text file: 

 $ git --no-pager log > log.txt

Capture sets of changed files over a range of commits: 

 $ for hash in COMMIT_HASH_1 COMMIT_HASH_2 COMMIT_HASH_3; do git diff-tree -r $hash; done

To find out which files have changed in the branch work on watermark timeouts, call git this way: 

  $ git diff --name-only COMMIT_HASH_1 COMMIT_HASH_2

To see the changes in one file between two commits, call git with the 'diff' command and these four arguments: 

  $ git diff COMMIT_HASH_1 COMMIT_HASH_2 -- RELATIVE_PATH_AND_FILENAME

Note: the double dash '--' separates commit hash args from filenames, as commit hashes may number more than two.



^ Git Inner Workings

Key words: Three Places of Git : "Three Places of Git" : git tracked changes stored in three places

Good trio of articles by Zvonimir Spajic, on `git` inner workings, how git works under the hood. These tutorials also explain some important git terminology. Among the git details presented here Zvonimir explains that git "sees" a developer's changes in three places: working directory, staging directory and local repository. The staging directory contains a particular version controlled project's git index file. Staged but not committed changes are kept in this index file.


^ Git Terminology

What it means to 'rebase' in context of git . . . 

  *  https://git-scm.com/docs/git-rebase


^ Git Branching

An official starting point for git branch use can be found at https://git-scm.com/docs/git-branch. Some articles on the large topic of best branching practices include:

When there are local changes that haven't been committed . . . 

  *  https://stackoverflow.com/questions/20568971/git-pull-keeps-telling-me-to-stash-local-changes-before-pulling

Excerpt from above link: 

It sounds like your local branch does not have all of the changes on origin.

Firstly, stash your changes

git stash

Then, pull in the changes from origin.

git fetch origin && git rebase origin/(branch name)

Next, add the stash back in to your working directory:

git stash pop


2022

2021 Renaming local and remote branches:

0404


^ Git Merge

History re-writing git tools achieved through . . .

2023-07-12 git Kraken site:


^ Git Rebase

Intro to git rebase:

References to and notes on `git rebase` in this section, starting with a blog post about `git rebase --onto`:

2023 September needed to rebase a local branch to a remote branch, namely `main`, which git could not merge in its fast-forward mode. Found solution with git invocation: 

 $ git pull origin main --rebase

First created a second branch name pointing to same commit as local `main` HEAD. Then deleted the local main branch, but not sure now whether this step is necessary.

A good explanation of uses of `git rebase --onto commit1 commit2 [commit3]` by Enrico Campidoglio:


^ Rebase versus Merge

stub section


^ Git Diff and Related

Git difference command `git range-diff` available on Ubuntu like systems via package `git-extras`. An introductory article on basic use of `range-diff` command:

Git's range-diff command may also take arguments of the form: 

  $ git range-diff $common_base $start_of_first_commit_series $start_hash_of_second_commit_series


^ Git Tags

Command `git show <tag_name>` . . .

A few `git tag` command uses:

    $ git tag
    $ git tag --delete <tag_name>
    $ git tag -a <tag_name> -m "tagging message here" [optional_commit_hash]


^ Git stash - stash is global across branches

Note that git stash "entries" are global across branches.

Some common uses of `git stash`: 

$ git stash --keep-index --include-untracked   # . . . to create a stash entry for the present branch (NEED in-page anchor to 'git index' terminology - TMH)

$ git stash list                               # . . . list stash entries for present branch

$ git stash list --all                         # . . . list stash entries for all branches of present local repository


^ Git log related

Keywords: git log pickaxe option

A git conventions / best practices article, specific conventions for git commit messages:

Ways to invoke `git log`:

Git's string search parameter or "pickaxe" log option `-S`:

At the command line in a color supporting terminal window, the following `git` invocation produces a useful tree like representation of local and remote branches: 

  $ git log --oneline --graph --all


^ Git remotes

Working with multiple git remotes , remote repositories. The following tutorial link to Jigarius leads to a good article. In attempting to set up a local git remote 'definition' with two remote URLs, it became clear that there are issues that break this effort when one remote repo is already created and has pre-existing history. It doesn't matter how short or simple that history is. So this is a good link, but may not be practical to set up multiple remotes to be updated with a single 'push' command when the remotes are not all fully under a given developer's control:

So another question which this prompts, this being the effort to push local work to multiple remotes, is: how does git handle symbolic links? Links at least in the Unix and Linux context?

On git handling of symlinks:

Adding ssh keys to ssh-agent, listing ssh keys, configuring multiple github emails:

How to list git configuration: 

  $ git config --list

How to modify remote repository URL: 

  $ git remote set-url origin git@github.com:[github_account_username]/[repository_name]

. . . this information thanks to post at https://stackoverflow.com/questions/2432764/how-do-i-change-the-uri-url-for-a-remote-git-repository.


^ Using Git and Subversion Together

Using Git and Subversion on one and the same project looks complicated . . .


^ Git For Windows notes

Looks like with latest (as of 2021-06-16) Git For Windows offers three different ways to configure credentials management. This seems important, here is a link provided by the Git-for-Windows installer:

Locally installed release notes at: file:///C:/Users/<user_name>/AppData/Local/Programs/Git/ReleaseNotes.html


^ References

Git fetch and merge preferrable to git pull . . .

Note: in Firefox 89.0.1 (64-bit) the key binding <CTRL>+j opens a message box showing download progress and history.



Retrieved from "https://wiki.neelanurseries.com/index.php?title=Git_notes&oldid=7538"