Difference between revisions of "Zephyr toolchain"
m |
m (adding notes on how to recover programability of NXP dual core microcontroller) |
||
| Line 16: | Line 16: | ||
$ pip3 install --upgrade pyocd | $ pip3 install --upgrade pyocd | ||
| + | <!-- odne komentar --> | ||
| + | |||
| + | When programming flash of a dual core NXP processor, it may be necessary to program each core separately with `pyocd` invocations like the following: | ||
| + | |||
| + | $ west flash --runner=pyocd -d /home/ted/projects-sandbox/workspace-for-app1/app1/build/cpu0 | ||
| + | | ||
| + | $ west flash --runner=pyocd -d /home/ted/projects-sandbox/workspace-for-app1/app1/build/cpu1 | ||
| + | |||
| + | There seem to be some dual-core Zephyr based app builds which, when flashed to the target MCU result in an error giving the following messages from pyocd: | ||
| + | |||
| + | <code> | ||
| + | ted@localhost1:~/projects-sandbox/workspace-for-app1/app1$ ./scripts/flash | ||
| + | -- west flash: rebuilding | ||
| + | ninja: no work to do. | ||
| + | -- west flash: using runner pyocd | ||
| + | -- runners.pyocd: Flashing file: /home/ted/projects-sandbox/workspace-for-app1/app1/build/cpu0/zephyr/zephyr.hex | ||
| + | 0001471 E Not supported by current CPU + target interface combination. [jlink] | ||
| + | 0001480 C Invalid error code: -2 [__main__] | ||
| + | FATAL ERROR: command exited with status 1: pyocd flash -e sector -a 0x10000000 -t lpc55s69 /home/ted/projects-sandbox/workspace-for-app1/app1/build/cpu0/zephyr/zephyr.hex | ||
| + | </code> | ||
| + | |||
| + | and | ||
| + | |||
| + | <code> | ||
| + | -- west flash: rebuilding | ||
| + | ninja: no work to do. | ||
| + | -- west flash: using runner pyocd | ||
| + | -- runners.pyocd: Flashing file: /home/ted/projects-sandbox/workspace-for-app1/app1/build/cpu1/zephyr/zephyr.hex | ||
| + | 0001373 E Not supported by current CPU + target interface combination. [jlink] | ||
| + | 0001387 C Invalid error code: -2 [__main__] | ||
| + | FATAL ERROR: command exited with status 1: pyocd flash -e sector -a 0x3a000 -t lpc55s69 /home/ted/projects-sandbox/workspace-for-app1/app1/build/cpu1/zephyr/zephyr.hex | ||
| + | </code> | ||
<!-- odne komentar --> | <!-- odne komentar --> | ||
Revision as of 05:07, 13 September 2023
Zephyr Toolchain Notes
2023-07-11
This page dedicated to capture installation and maintenance steps for Zephyr RTOS toolchain. Main Zephyr toolchain and SDK install steps outlined at:
When flashing targeted hardware with Python3 based `pyocd`, install this tool via pip3 command:
$ pip3 install --upgrade pyocd
When programming flash of a dual core NXP processor, it may be necessary to program each core separately with `pyocd` invocations like the following:
$ west flash --runner=pyocd -d /home/ted/projects-sandbox/workspace-for-app1/app1/build/cpu0 $ west flash --runner=pyocd -d /home/ted/projects-sandbox/workspace-for-app1/app1/build/cpu1
There seem to be some dual-core Zephyr based app builds which, when flashed to the target MCU result in an error giving the following messages from pyocd:
ted@localhost1:~/projects-sandbox/workspace-for-app1/app1$ ./scripts/flash
-- west flash: rebuilding
ninja: no work to do.
-- west flash: using runner pyocd
-- runners.pyocd: Flashing file: /home/ted/projects-sandbox/workspace-for-app1/app1/build/cpu0/zephyr/zephyr.hex
0001471 E Not supported by current CPU + target interface combination. [jlink]
0001480 C Invalid error code: -2 [__main__]
FATAL ERROR: command exited with status 1: pyocd flash -e sector -a 0x10000000 -t lpc55s69 /home/ted/projects-sandbox/workspace-for-app1/app1/build/cpu0/zephyr/zephyr.hex
and
-- west flash: rebuilding
ninja: no work to do.
-- west flash: using runner pyocd
-- runners.pyocd: Flashing file: /home/ted/projects-sandbox/workspace-for-app1/app1/build/cpu1/zephyr/zephyr.hex
0001373 E Not supported by current CPU + target interface combination. [jlink]
0001387 C Invalid error code: -2 [__main__]
FATAL ERROR: command exited with status 1: pyocd flash -e sector -a 0x3a000 -t lpc55s69 /home/ted/projects-sandbox/workspace-for-app1/app1/build/cpu1/zephyr/zephyr.hex
