Difference between revisions of "Current debugging"
From Wiki at Neela Nurseries
(Start of new page "current debugging") |
(No difference)
|
Revision as of 02:23, 6 November 2022
2022-11-05 SAT
[00:00:00.009,000] <err> IIS2DH: iis2dh@18: device ������rF����� is not ready [00:00:00.017,000] <err> IIS2DH: Failed to initialize interrupts *** Booting Zephyr OS build zephyr-v3.2.0 *** - scoreboard - in setter function test val holds 0, - scoreboard - setting test val to 5, - DEV 1028 - symbol ST_IIS2DH got assigned 'DT_N_S_soc_S_peripheral_50000000_S_flexcomm_8a000_S_iis2dh_18' - kd_thread_iis2dh - Success finding iis2dh device, - kd_thread_iis2dh - WARNING - sensor device 'iis2dh@18' is not ready! - kd_thread_iis2dh - INFO: device name (Zephyr compile time setting) found to be 'iis2dh@18' - kd_thread_iis2dh - INFO: boot time Zephyr init result value holds 5, - DEV 1101 - WHO_AM_I register 0x0F holds 0x33 - DEV 1101 - config register 0x22 holds 0x10 - FIFO control reg holds 0x4f - updating this value to set watermark at 16 data entries . . . - write_register() returns status of 0, - following update, FIFO control reg holds 0x4f - updating FIFO ctrl register to enable FIFO mode . . . - reading back vale . . . - FIFO ctrl register now holds 0x4F. - kd_thread_iis2dh - unconditionally attempting to configure data ready (drdy-gpios) interrupt, Waiting for triggers - whoami register, ODR register, and ctrl reg 5 hold 0x33, 0x57, 0x40 - whoami register, ODR register, and ctrl reg 5 hold 0x33, 0x57, 0x40 - whoami register, ODR register, and ctrl reg 5 hold 0x33, 0x57, 0x40