Difference between revisions of "Spi device tree source code"
From Wiki at Neela Nurseries
m |
m (manually adding line numbers for dts file excerpt.) |
||
Line 13: | Line 13: | ||
<pre> | <pre> | ||
− | + | 142 | |
+ | 143 | ||
+ | 144 | ||
+ | 145 | ||
+ | 146 | ||
+ | 147 | ||
+ | 148 | ||
+ | 149 | ||
+ | 150 | ||
+ | 151 | ||
+ | 152 | ||
+ | 153 | ||
+ | 154 | ||
+ | 155 | ||
+ | 156 | ||
+ | 157 | ||
+ | 158 | ||
+ | 159 | ||
+ | 160 | ||
+ | 161 | ||
+ | 162 | ||
</pre> | </pre> |
Revision as of 22:42, 11 August 2022
2022-08-11 Thursday
Notes on SPI device tree source, with goal to add SPI device to modified RPi Pico DTS files, which build firmware to run on Sparkfun DEV-18288 board.
In Zephyr RTOS' supported board dts files we find SPI peripherals defined for several boards. Here are excerpts
zephyr/boards/arm/sparkfun_thing_plus_nrf9160/sparkfun_thing_plus_nrf9160_common.dts
142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 |
&spi3 { compatible = "nordic,nrf-spim"; status = "okay"; cs-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; pinctrl-0 = <&spi3_default>; pinctrl-1 = <&spi3_sleep>; pinctrl-names = "default", "sleep"; w25q32jv: w25q32jv@0 { compatible = "jedec,spi-nor"; label = "W25Q32JV"; reg = <0>; spi-max-frequency = <40000000>; wp-gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; hold-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; size = <0x2000000>; has-dpd; t-enter-dpd = <3000>; t-exit-dpd = <30000>; jedec-id = [ ef 40 16 ]; }; }; |
a |
b |
^ YAML device bindings files
To support a typical development kit or custom board with multiple peripherals we need a device bindings file comparable to this ... bindings file:
- ~/projects-sandbox/workspace-for-rpi/zephyr/boards/arm/nrf9160dk_nrf9160/nrf9160dk_nrf9160.yaml
identifier: nrf9160dk_nrf9160 name: nRF9160-DK-NRF9160 type: mcu arch: arm toolchain: - gnuarmemb - xtools - zephyr ram: 88 flash: 256 supported: - arduino_gpio - arduino_i2c - gpio - i2c - pwm - spi - watchdog - counter