Difference between revisions of "Nrf52-timer-config"

Revision as of 14:58, 25 April 2021

2021-04-25

Looking at some example code in nRF5SDK153059ac345/nRF5_SDK_15.3.0_59ac345/components/app_simple_timer.c, there are routines to init, start, stop (pause) and to uninitialize. Given a task to assure that a Nordic chip goes into lower or lowest possible power mode, we'll first examine the 'stop' and 'uninit' routines in this Nordic demo code.

The routine uint32_t app_simple_timer_stop(void) is a wrapper to nrf_drv_timer_pause(nrfx_timer_t const * const p_instance). Going through reverse engineering steps this routine is first defined via a macro:

  ./integration/nrfx/legacy/nrf_drv_timer.h:82:#define nrf_drv_timer_pause          nrfx_timer_pause

The definition of nrfx_timer_pause() is in the following .c file,

  ./modules/nrfx/drivers/include/nrfx_timer.h:186:void nrfx_timer_pause(nrfx_timer_t const * const p_instance);
  ./modules/nrfx/drivers/src/nrfx_timer.c:170:void nrfx_timer_pause(nrfx_timer_t const * const p_instance)

First Nordic demo code directories in which we're reviewing files:

nRF5SDK153059ac345/nRF5_SDK_15.3.0_59ac345/components/libraries/simple_timer
nRF5SDK153059ac345/nRF5_SDK_15.3.0_59ac345/modules
nRF5SDK153059ac345/nRF5_SDK_15.3.0_59ac345/modules/nrfx/drivers/include
nRF5SDK153059ac345/nRF5_SDK_15.3.0_59ac345/modules/nrfx/drivers/src
nRF5SDK153059ac345/nRF5_SDK_15.3.0_59ac345/integration/nrfx/legacy

Something interesting in file nrfx_timer.c, looks like a compile time evaluation may determine the size of an array of time_control_block_t types:

   64 static timer_control_block_t m_cb[NRFX_TIMER_ENABLED_COUNT];

. . . sure enough, in ../include/nrfx_timer.h there is an enum whose members are conditionally compiled. Clever!:

enum {
#if NRFX_CHECK(NRFX_TIMER0_ENABLED)
    NRFX_TIMER0_INST_IDX,
#endif
#if NRFX_CHECK(NRFX_TIMER1_ENABLED)
    NRFX_TIMER1_INST_IDX,
#endif
#if NRFX_CHECK(NRFX_TIMER2_ENABLED)
    NRFX_TIMER2_INST_IDX,
#endif
#if NRFX_CHECK(NRFX_TIMER3_ENABLED)
    NRFX_TIMER3_INST_IDX,
#endif
#if NRFX_CHECK(NRFX_TIMER4_ENABLED)
    NRFX_TIMER4_INST_IDX,
#endif
    NRFX_TIMER_ENABLED_COUNT
};

So the first demo routine of interest, to pause or equivalently stop a timer is:

void nrfx_timer_pause(nrfx_timer_t const * const p_instance)
{
    NRFX_ASSERT(m_cb[p_instance->instance_id].state != NRFX_DRV_STATE_UNINITIALIZED);
    nrf_timer_task_trigger(p_instance->p_reg, NRF_TIMER_TASK_STOP);
    NRFX_LOG_INFO("Paused instance: %d.", p_instance->instance_id);
}

We're looking at this to determine whether stopping a timer removes power from the timer peripheral in the nRF52 SoC. Looks like there is another layer of routine nesting with the call here to nrf_timer_task_trigger(). There may be some clue as to how this routine works, and possibly one of the parameters it accepts will power off a given timer. Here are all calls to it in the nrfx/drivers directory:

ted@localhost$ ./nRF5SDK153059ac345/nRF5_SDK_15.3.0_59ac345/modules/nrfx/drivers
$ grep -nr nrf_timer_task_trigger ./*
./src/nrfx_timer.c:144:    nrf_timer_task_trigger(p_instance->p_reg, NRF_TIMER_TASK_START);
./src/nrfx_timer.c:152:    nrf_timer_task_trigger(p_instance->p_reg, NRF_TIMER_TASK_SHUTDOWN);
./src/nrfx_timer.c:166:    nrf_timer_task_trigger(p_instance->p_reg, NRF_TIMER_TASK_START);
./src/nrfx_timer.c:173:    nrf_timer_task_trigger(p_instance->p_reg, NRF_TIMER_TASK_STOP);
./src/nrfx_timer.c:180:    nrf_timer_task_trigger(p_instance->p_reg, NRF_TIMER_TASK_CLEAR);
./src/nrfx_timer.c:188:    nrf_timer_task_trigger(p_instance->p_reg, NRF_TIMER_TASK_COUNT);
./src/nrfx_timer.c:197:    nrf_timer_task_trigger(p_instance->p_reg,