Difference between revisions of "Current debugging"

Revision as of 17:40, 10 November 2022

2022-11-05 SAT

[00:00:00.009,000] <err> IIS2DH: iis2dh@18: device ������rF����� is not ready
[00:00:00.017,000] <err> IIS2DH: Failed to initialize interrupts
*** Booting Zephyr OS build zephyr-v3.2.0  ***
- scoreboard - in setter function test val holds 0,
- scoreboard - setting test val to  5,
- DEV 1028 - symbol ST_IIS2DH got assigned 'DT_N_S_soc_S_peripheral_50000000_S_flexcomm_8a000_S_iis2dh_18'
- kd_thread_iis2dh - Success finding iis2dh device,
- kd_thread_iis2dh - WARNING - sensor device 'iis2dh@18' is not ready!
- kd_thread_iis2dh - INFO:  device name (Zephyr compile time setting) found to be 'iis2dh@18'
- kd_thread_iis2dh - INFO:  boot time Zephyr init result value holds 5,
- DEV 1101 - WHO_AM_I register 0x0F holds 0x33
- DEV 1101 - config register 0x22 holds 0x10
- FIFO control reg holds 0x4f
- updating this value to set watermark at 16 data entries . . .
- write_register() returns status of 0,
- following update, FIFO control reg holds 0x4f
- updating FIFO ctrl register to enable FIFO mode . . .
- reading back vale . . .
- FIFO ctrl register now holds 0x4F.
- kd_thread_iis2dh - unconditionally attempting to configure data ready (drdy-gpios) interrupt,
Waiting for triggers
- whoami register, ODR register, and ctrl reg 5 hold 0x33, 0x57, 0x40
- whoami register, ODR register, and ctrl reg 5 hold 0x33, 0x57, 0x40
- whoami register, ODR register, and ctrl reg 5 hold 0x33, 0x57, 0x40

^ Device Tree syntax and Undocumented DTS

• https://elinux.org/Device_Tree_Mysteries#explain_some_more